E20-375 Practice Test

What is a quick way to determine if the required TCP ports for RecoverPoint are blocked?

A.

Run the Ports Diagnostics test by connecting to an RPA as the boxmgmt user

B.

Browse to the site management address and open Unisphere for RecoverPoint

C.

Run the Port Diagnostics test by connecting to an RPA as the admin user

D.

Run the Port Diagnostics test by connecting to an RPA as the security-admin user

A customer has two VMAX arrays and three VNX arrays fronted by an EMC VPLEX. They
wish to use RecoverPoint to protect their environment.
How many licenses, and of which type, would be required for their environment?

A.

1 EX license

B.

1 SE license and 2 EX licenses

C.

5 EX licenses

D.

6 EX licenses

You are adding a new vRPA to a cluster using the Add New RPAs wizard in Deployment
Manager. SAN diagnostics fail and you cannot add the RPA. Pings to the vRPA and VNX
iSCSI ports are returned successfully.
What is most likely the cause for this connection problem?

A.

CHAP authentication not correct

B.

vRPA iSCSI ports MTU set to a number lower than 9000

C.

Default gateway setting for RPA iSCSI ports not correct

D.

Wrong IP version set on vRPA iSCSI ports

What would cause a volume sweep to occur?

A.

A previously disabled volume is enabled

B.

A new Replication Set is added to a disabled Consistency Group

C.

A previously enabled splitter is disabled

D.

A Replication Set is removed from a disabled Consistency Group

A RecoverPoint/SE cluster is using vRPAs. A second cluster needs to be connected.
Which RPA type must be used at the new cluster?

A.

Virtual or Physical

B.

Virtual only

C.

Generation 5

D.

Physical only