Splunk SPLK-2002 Test Dumps

C.   Knowledge Object replication.

Answer DescriptionExplanation: The correct answer is C. Knowledge Object replication. This is a valid use case that a search head cluster addresses, as it ensures that all the search heads in the cluster have the same set of knowledge objects, such as saved searches, dashboards, reports, and alerts1. The search head cluster replicates the knowledge objects across the cluster members, and synchronizes any changes or updates1. This provides a consistent user experience and avoids data inconsistency or duplication1. The other options are not valid use cases that a search head cluster addresses. Option A, providing redundancy in the event a search peer fails, is not a use case for a search head cluster, but for an indexer cluster, which maintains multiple copies of the indexed data and can recover from indexer failures2. Option B, search affinity, is not a use case for a search head cluster, but for a multisite indexer cluster, which allows the search heads to preferentially search the data on the local site, rather than on a remote site3. Option D, increased Search Factor (SF), is not a use case for a search head cluster, but for an indexer cluster, which determines how many searchable copies of each bucket are maintained across the indexers4. Therefore, option C is the correct answer, and options A, B, and D are incorrect.

C.   CHARSET

Answer DescriptionExplanation:
According to the Splunk documentation1, the CHARSET setting in props.conf specifies the character set encoding of the source data. This setting has the least impact on indexing performance, as it only affects how Splunk interprets the bytes of the data, not how it processes or transforms the data. The other options are false because:

1. The SHOULD_LINEMERGE setting in props.conf determines whether Splunk breaks events based on timestamps or newlines. This setting has a significant impact on indexing performance, as it affects how Splunk parses the data and identifies the boundaries of the events2.
2. The TRUNCATE setting in props.conf specifies the maximum number of characters that Splunk indexes from a single line of a file. This setting has a moderate impact on indexing performance, as it affects how much data Splunk reads and writes to the index3.
3. The TIME_PREFIX setting in props.conf specifies the prefix that directly precedes the timestamp in the event data. This setting has a moderate impact on indexing performance, as it affects how Splunk extracts the timestamp and assigns it to the event.

C.   Inside a searchable bucket, there is tsidx and rawdata.


D.   Inside a replicated bucket, there is both tsidx and rawdata.

Answer DescriptionExplanation:
According to the Splunk documentation1, a bucket within a clustered index contains two key types of files: the raw data in compressed form (rawdata) and the indexes that point to the raw data (tsidx files). A bucket can be either replicated or searchable, depending on whether it has both types of files or only the rawdata file. A replicated bucket is a bucket that has been copied from one peer node to another for the purpose of data replication. A searchable bucket is a bucket that has both the rawdata and the tsidx files, and can be searched by the search heads. The types of files that exist in a bucket within a clustered index are:
Inside a searchable bucket, there is tsidx and rawdata. This is true because a searchable bucket contains both the data and the index files, and can be searched by the search heads1.
Inside a replicated bucket, there is both tsidx and rawdata. This is true because a replicated bucket can also be a searchable bucket, if it has both the data and the index files. However, not all replicated buckets are searchable, as some of them might only have the rawdata file, depending on the replication factor and the search factor settings1.
The other options are false because:
Inside a replicated bucket, there is only rawdata. This is false because a replicated bucket can also have the tsidx file, if it is a searchable bucket. A replicated bucket only has the rawdata file if it is a non-searchable bucket, which means that it cannot be searched by the search heads until it gets the tsidx file from another peer node1.
Inside a searchable bucket, there is only tsidx. This is false because a searchable bucket always has both the tsidx and the rawdata files, as they are both required for searching the data. A searchable bucket cannot exist without the rawdata file, as it contains the actual data that the tsidx file points to1.

D.   node3

Answer DescriptionExplanation:
The Splunk server name of the member can typically be determined by the serverName attribute in the server.conf file, which is not explicitly shown in the provided snippet.
However, based on the provided configuration snippet, we can infer that this search head cluster member is configured to communicate with a cluster master (master_uri) located at node1 and a management node (mgmt_uri) located at node3. The serverName is not the same as the master_uri or mgmt_uri; these URIs indicate the location of the master and management nodes that this member interacts with.
Since the serverName is not provided in the snippet, one would typically look for a setting under the [general] stanza in server.conf. However, given the options and the common naming conventions in a Splunk environment, node3 would be a reasonable guess for the server name of this member, since it is indicated as the management URI within the [shclustering] stanza, which suggests it might be the name or address of the server in question.
For accurate identification, you would need to access the full server.conf file or the Splunk Web on the search head cluster member and look under Settings > Server settings > General settings to find the actual serverName. Reference for these details would be found in the Splunk documentation regarding the configuration files, particularly server.conf.

C.   100 GB per day

Answer DescriptionExplanation:
The correct answer is C. 100 GB per day. This is the expected minimum amount of storage required for data across an indexer cluster with the given input and parameters. The storage requirement can be calculated by adding the raw data size and the index files size, and then multiplying by the Replication Factor and the Search Factor1. In this case, the calculation is:
(15 GB + 35 GB) x 2 x 2 = 100 GB
The Replication Factor is the number of copies of each bucket that the cluster maintains across the set of peer nodes2. The Search Factor is the number of searchable copies of each bucket that the cluster maintains across the set of peer nodes3. Both factors affect the storage requirement, as they determine how many copies of the data are stored and searchable on the indexers. The other options are not correct, as they do not match the result of the calculation. Therefore, option C is the correct answer, and options A, B, and D are incorrect.

A.   Error messages are appearing underneath the search bar in Splunk Web.

Answer DescriptionExplanation:
According to the Splunk documentation1, the Search Job Inspector is a tool that you can use to troubleshoot search performance and understand the behavior of knowledge objects, such as event types, tags, lookups, and so on, within the search. You can inspect search jobs that are currently running or that have finished recently. The Search Job Inspector can help you investigate error messages that appear underneath the search bar in Splunk Web, as it can show you the details of the search job, such as the search string, the search mode, the search timeline, the search log, the search profile, and the search properties. You can use this information to identify the cause of the error and fix it2. The other options are false because:
Dashboard panels showing “Waiting for queued job to start” on page load is not a problem that can be investigated using the Search Job Inspector, as it indicates that the search job has not started yet. This could be due to the search scheduler being busy or the search priority being low. You can use the Jobs page or the Monitoring Console to monitor the status of the search jobs and adjust the priority or concurrency settings if needed3.
Different users seeing different extracted fields from the same search is not a problem that can be investigated using the Search Job Inspector, as it is related to the user permissions and the knowledge object sharing settings. You can use the Access Controls page or the Knowledge Manager to manage the user roles and the knowledge object visibility4.
Events not being sorted in reverse chronological order is not a problem that can be investigated using the Search Job Inspector, as it is related to the search syntax and the sort command. You can use the Search Manual or the Search Reference to learn how to use the sort command and its options to sort the events by any field or criteria.

B.   web_access.log

Answer DescriptionExplanation:
A lookup table is a file that contains a list of values that can be used to enrich or modify the data during search time1. Lookup tables can be stored in CSV files or in the KV Store1. Troubleshooting lookup tables involves identifying and resolving issues that prevent the lookup tables from being accessed, updated, or applied correctly by the Splunk searches.
Some of the tools and methods that can help with troubleshooting lookup tables are:
web_access.log: This is a file that contains information about the HTTP requests and responses that occur between the Splunk web server and the clients2. This file can help troubleshoot issues related to lookup table permissions, availability, and errors, such as 404 Not Found, 403 Forbidden, or 500 Internal Server Error34.
btool output: This is a command-line tool that displays the effective configuration settings for a given Splunk component, such as inputs, outputs, indexes, props, and so on5. This tool can help troubleshoot issues related to lookup table definitions, locations, and precedence, as well as identify the source of a configuration setting6.
search.log: This is a file that contains detailed information about the execution of a search, such as the search pipeline, the search commands, the search results, the search errors, and the search performance. This file can help troubleshoot issues related to lookup table commands, arguments, fields, and outputs, such as lookup, inputlookup, outputlookup, lookup_editor, and so on.
Option B is the correct answer because web_access.log is the best place to start troubleshooting lookup table issues, as it can provide the most relevant and immediate information about the lookup table access and status. Option A is incorrect because btool output is not a log file, but a command-line tool. Option C is incorrect because health.log is a file that contains information about the health of the Splunk components, such as the indexer cluster, the search head cluster, the license master, and the deployment server.
This file can help troubleshoot issues related to Splunk deployment health, but not necessarily related to lookup tables. Option D is incorrect because configuration_change.log is a file that contains information about the changes made to the Splunk configuration files, such as the user, the time, the file, and the action. This file can help troubleshoot issues related to Splunk configuration changes, but not necessarily related to lookup tables.

B.   etc/slave-apps/

Answer DescriptionExplanation:
According to the Splunk documentation1, the Splunk Deployer deploys app content to the etc/slave-apps/ directory on the search head cluster members by default. This directory contains the apps that the deployer distributes to the members as part of the configuration bundle. The other options are false because:

1. The etc/apps/ directory contains the apps that are installed locally on each member, not the apps that are distributed by the deployer2.
2. The etc/shcluster/ directory contains the configuration files for the search head cluster, not the apps that are distributed by the deployer3.
3. The etc/deploy-apps/ directory is not a valid Splunk directory, as it does not exist in the Splunk file system structure4.