HP HPE7-A02 Test Dumps

B.   Use ClearPass Insight to run an Active Endpoint Security report.

Answer DescriptionExplanation:

To show the security team information about MAC spoofing attempts detected by HPE Aruba Networking ClearPass Policy Manager (CPPM), you should use ClearPass Insight to run an Active Endpoint Security report. ClearPass Insight provides comprehensive reporting capabilities that include detailed information on security incidents, such as MAC spoofing attempts. By generating this report, you can provide the security team with a clear overview of the detected spoofing activities, including the endpoints involved and the context of the events.

[Reference: The ClearPass documentation and Insight reporting guide offer detailed instructions on generating and interpreting Active Endpoint Security reports, which include data on MAC spoofing and other security incidents., , , ]

D.   A UBT reserved VLAN set to a VLAN dedicated for that purpose

Answer DescriptionExplanation:

To tunnel VoIP phone traffic from AOS-CX switches to an HPE Aruba Networking gateway, you need to configure a User-Based Tunneling (UBT) reserved VLAN on the switches. This VLAN is dedicatedfor tunneling purposes and ensures that the VoIP traffic is correctly identified and tunneled to the gateway where security policies can be applied.

1.UBT Configuration: Setting a UBT reserved VLAN ensures that the switch knows which VLAN to use for tunneling traffic to the gateway.
2.Traffic Tunneling: The reserved VLAN helps in segregating the VoIP traffic, ensuring it is handled securely and according to the configured policies at the gateway.
3.Policy Application: By tunneling the traffic, the gateway can apply advanced security policies to the VoIP traffic.

[Reference: Aruba's AOS-CX and UBT configuration guides detail the steps for setting up reserved VLANs for tunneling traffic to gateways., , ]

C.   Enable Insight in the CPPM server configuration settings.

Answer DescriptionExplanation:

To integrate HPE Aruba Networking ClearPass Policy Manager (CPPM) with HPE Aruba Networking ClearPass Device Insight (CPDI), one of the necessary tasks is to enable Insight in the CPPM server configuration settings. This configuration allows CPPM to communicate and share data with CPDI, facilitating the integration and enabling enhanced device profiling and policy enforcement capabilities.

1.Insight Enablement: Enabling Insight on the CPPM server allows it to leverage the data and capabilities of CPDI, integrating device profiling information into policy decisions.
2.Data Sharing: This integration ensures that CPPM can receive and use detailed device information from CPDI to make more informed policy enforcement decisions.
3.Configuration: Properly configuring the server settings to enable Insight ensures seamless communication and data flow between CPPM and CPDI.

[Reference: Aruba ClearPass integration guides provide detailed instructions on enabling Insight and configuring the necessary settings for effective integration between CPPM and CPDI., , ]

D.   CPDI can use tags to inform CPPM that clients are using prohibited applications; CPPM can then tell the network infrastructure to quarantine those clients.

Answer DescriptionExplanation:

Integrating HPE Aruba Networking ClearPass Policy Manager (CPPM) and HPE Aruba Networking ClearPass Device Insight (CPDI) can help a company implement Zero Trust Security by allowing CPDI to use tags to inform CPPM that clients are using prohibited applications. CPPM can then take action, such as telling the network infrastructure to quarantine those clients, ensuring that only compliant and trusted devices have network access.

1.Device Insight Tags: CPDI can monitor client behavior and tag devices that are using prohibited applications.
2.Policy Enforcement: CPPM can use these tags to apply specific enforcement actions, such as quarantining non-compliant devices.
3.Zero Trust Implementation: This integration supports Zero Trust Security by ensuring that all devices are continuously monitored and controlled based on their behavior and compliance with security policies.
[Reference: Aruba's ClearPass integration guides detail how CPDI and CPPM can work together to enhance security by leveraging device insights and dynamic policy enforcement., , ]

A.   Use HPE Aruba Networking Central floorplans or the detecting AP identities to locate the general area for the threat.

Answer DescriptionExplanation:

When HPE Aruba Networking Central detects an Infrastructure Attack, such as "Detect adhoc using Valid SSID," the next step is to locate the general area of the threat. You can use HPE ArubaNetworking Central floorplans or the identities of the detecting APs to pinpoint the approximate location of the adhoc network. This allows you to physically investigate and address the source of the threat, ensuring that unauthorized or rogue networks are quickly identified and mitigated.

[Reference: Aruba Central documentation and RAPIDS events management guides offer strategies for locating and responding to detected security threats, emphasizing the use of network tools and floorplans to effectively address potential vulnerabilities., , , ]

B.   That the pool is associated with the role to which the VIA clients are being assigned

Answer DescriptionExplanation:

If VIA clients are not receiving IP addresses from the configured VPN pool, one setting to check is whether the pool is associated with the role to which the VIA clients are being assigned. The association between the IP pool and the role ensures that clients assigned to that role receive IP addresses from the correct pool.

1.Role Association: Each role can be associated with a specific IP pool, ensuring that clients assigned to the role receive addresses from the intended pool.
2.IP Allocation: Proper configuration of the IP pool and its association with the role is crucial for correct IP address allocation.
3.VIA Configuration: Ensuring that all settings, including IP pool associations, are correctly configured, facilitates seamless client connectivity.

[Reference: Aruba's VIA configuration guides provide detailed steps for setting up VPN pools and associating them with client roles to ensure correct IP address allocation., , ]

D.   Ingress Event Dictionaries for Check Point messages are enabled.

Answer DescriptionTo ensure that HPE Aruba Networking ClearPass Policy Manager (CPPM) responds correctly to Syslog messages from a Check Point firewall, you need to check that the Ingress Event Dictionaries for Check Point messages are enabled. These dictionaries are necessary for CPPM to properly interpret and respond to the Syslog messages received from the firewall.

1.Event Dictionaries: Ingress Event Dictionaries allow CPPM to understand the specific format and content of Syslog messages from various sources, such as Check Point firewalls.

2.Message Interpretation: Without these dictionaries enabled, CPPM may not correctly interpret the Syslog messages, leading to a failure in triggering the expected actions.

3.Configuration Check: Ensuring that the dictionaries are enabled is crucial for the proper functioning of the event service and accurate response to security events.

[Reference: ClearPass documentation on Syslog integration and event service setup provides information on configuring Ingress Event Dictionaries for different event sources., , ]

D.   The one with the lowest port ID

Answer DescriptionExplanation:

When deploying a virtual Data Collector for HPE Aruba Networking ClearPass Device Insight (CPDI), it is essential to ensure that the correct virtual port is connected to the designated VLAN. In this case, VLAN 101 is used to receive the IP address and connect to Aruba Central. The best practice is to use the virtual port with the lowest port ID. This is typically the primary port used for management and network connectivity in virtual environments, ensuring proper network integration and communication.

[Reference: Aruba's ClearPass Device Insight deployment guides and virtual appliance setup documentation provide detailed instructions on configuring network interfaces and VLAN assignments., , , , , ]

A.   Add the CPPM server's IP address to the IP helper list in all client VLANs on routing switches.

Answer DescriptionExplanation:

To support the requirement for HPE Aruba Networking ClearPass Policy Manager (CPPM) to have HTTP User-Agent strings for profiling devices, you should add the CPPM server's IP address to the IP helper list in all client VLANs on routing switches. This configuration ensures that DHCP requests and other relevant client traffic are forwarded to CPPM, allowing it to capture HTTP User-Agent strings and use them for device profiling.

1.IP Helper Configuration: Adding CPPM to the IP helper list ensures that the switch forwards DHCP and other client traffic to CPPM, enabling it to gather necessary information for profiling.
2.User-Agent Strings: By receiving client traffic, CPPM can analyze HTTP headers and capture User-Agent strings, which provide valuable information about the client's device and browser.
3.Profiling Support: This approach supports the comprehensive profiling of devices, allowing CPPM to apply appropriate policies based on detailed device information.

[Reference: Aruba ClearPass and AOS-CX switch configuration guides detail the process of setting up IP helper addresses and the benefits of forwarding client traffic to CPPM for enhanced profiling and policy enforcement., , ]

A.   TEAP

Answer DescriptionExplanation:

To enforce 802.1X authentication for Windows domain computers to HPE Aruba Networking ClearPass Policy Manager (CPPM) and have the computers authenticate as both machines and users in the same session, you should set up TEAP (Tunneled EAP) as the authentication method. TEAP supports both machine and user authentication within a single 802.1X session, making it suitable for scenarios where both types of authentication are required simultaneously.

[Reference: Aruba ClearPass configuration guides provide detailed instructions on setting up TEAP for environments requiring combined machine and user authentication., , , , ]