Home / HP / Aruba Certified Switching Professional (ACSP) V1 / HPE6-A73 - Aruba Certified Switching Professional

HP All Exams PDF


1 Month PDF Access For All Available Exams with Updates
$100

$400

Buy HP All ExamsDisclaimer: Fair Usage Policy - Daily 5 Downloads

HP HPE6-A73 Dumps

Total Questions Answers: 127
Last Updated: 7-Nov-2024
Available with 1, 3, 6 and 12 Months Free Updates Plans
PDF: $15 $60

Test Engine: $20 $80

PDF + Engine: $25 $99

Latest HPE6-A73 Exam Questions


Question # 1



An administrator is designing an access layer solution in a data center. A key requirement is to dual-home mission-critical server connections to two different switches, ensuring that the servers always have network access, even during switch software upgrades. This feature should support strictly-controlled provisioning. What would best meet the administrator's needs when deploying AOS-CX switches?
A. VSF
B. Dynamic segmentation
C. VSX
D. NAE



A.
  VSF





Question # 2



An administrator is implementing a multicast solution in a multi-VLAN network. Which statement is true about the configuration of the switches in the network?
A. IGMP snooping must be enabled on all interfaces on a switch to intelligently forward traffic
B. IGMP requires join and leave messages to graft and prune multicast streams between switches
C. IGMP must be enabled on all routed interfaces where multicast traffic will traverse
D. IGMP must be enabled on all interfaces where multicast sources and receivers are connected



C.
  IGMP must be enabled on all routed interfaces where multicast traffic will traverse





Question # 3



What is correct regarding rate limiting and egress queue shaping on AOS-CX switches?
A. Only a traffic rate and burst size can be defined for a queue
B. Limits can be defined only for broadcast and multicast traffic
C. Rate limiting and egress queue shaping can be used to restrict inbound traffic
D. Rate limiting and egress queue shaping can be applied globally



A.
  Only a traffic rate and burst size can be defined for a queue

you could apply egress queue shaping to the high priority queues to prevent starvation of low priority queues. Egress queue shaping allows you to apply a maximum bandwidth to a priority queue, as well as a burst size. The port buffers excess traffic up to the burst size and sends the buffered traffic at the max rate, smoothing out bursts while also preventing the high priority queue from exceeding its maximum rate and starving out lower priority queues.




Question # 4



An administrator will be replacing a campus switching infrastructure with AOS-CX switches that support VSX capabilities. The campus involves a core, as well as multiple access layers. Which feature should the administrator implement to allow both VSX-capable core switches to process traffic sent to the default gateway in the campus VLANs?
A. VRF
B. VRRP
C. IP helper
D. Active gateway



D.
  Active gateway

Active gateway = both devices route/forward traffic VRRP = Active-standbye, only active member routes/forwards traffic

Understand the Active Gateway principle In a VSX system, active gateway provides redundant default gateway functionality for the end-hosts. The default gateway of the end-host is automatically handled by both the VSX systems.




Question # 5



An administrator will be implementing tunneling between AOS-CX switches and Aruba gateways. Which list of protocols must minimally be allowed by an intermediate firewall between two sets of devices?
A. IP protocol 50 and UDP 8209
B. UDP 4500 and IP protocol 47
C. UDP 8211 and IP protocol 47
D. UDP 4500 and UDP 8209



C.
  UDP 8211 and IP protocol 47

ACSP Study Guide Page 788 - Allow the following protocols/ports

- PAPI: UDP 8211
- GRE: Protocoll 47




Question # 6



What is required when implementing captive portal an AOS-CX switches?
A. Certificate installed on the switch
B. Web server running on the switch
C. Device fingerprinting
D. AAA server



D.
  AAA server





Question # 7



A network engineer for a company with 896 users across a multi-building campus wants to gather statistics on an important switch uplink and create actions based on issues that occur on the uplink. How often does an NAE agent gather information from the current state database in regard to the uplink interfaces?
A. Once every 60 seconds
B. Once every 1 second
C. Once every 30 seconds
D. Once every 5 seconds



D.
  Once every 5 seconds





Question # 8



An administrator has an aggregation layer of 8325CX switches configured as a VSX pair. The administrator is concerned that when OSPF network changes occur, the aggregation switches will respond to the changes slowly, and this will affect network connectivity, especially VoIP calls, in the connected access layer switches. What should the administrator do on the aggregation layer switches to alleviate this issue?D18912E1457D5D1DDCBD40AB3BF70D5D
A. Implement route aggregation
B. Implement bidirectional forwarding detection (BFD)
C. Reduce the hello and dead interval timers
D. Implement graceful restart



A.
  Implement route aggregation

"BFD tests the connectivity between two IP addresses in a BFD session. BFD reports when connectivity is lost. The router (or routing switch) can then use that information to take the appropriate actions, depending on the functions to which you have tied BFD"




Question # 9



An administrator creates an ACL rule with both the “count” and “log” option enabled. What is correct about the action taken by an AOS-CX switch when there is a match on this rule?
A. By default, a summarized log is created every minute with a count of the number of matches
B. Logging will not include certificate and TLS events, but counting will
C. The “count” and “log” options are processed by the AOS-CX switch’s hardware ASIC
D. The total in the “log” record and the count could contain different rule matching statistics



D.
  The total in the “log” record and the count could contain different rule matching statistics

From the "AOS-CX 10.08 ACLs and Classifier Policies Guide" : "You may see a minor discrepancy between the ACL logging statistics and the hit counts statistics due to the time required to record the log message."




Question # 10



Which protocol does NetEdit use to discover devices in a subnet during the discovery process?
A. LLDP
B. ARP
C. DHCP
D. ICMP



A.
  LLDP




Get 127 Aruba Certified Switching Professional questions Access in less then $0.12 per day.

HP Bundle 1:


1 Month PDF Access For All HP Exams with Updates
$100

$400

Buy Bundle 1

HP Bundle 2:


3 Months PDF Access For All HP Exams with Updates
$200

$800

Buy Bundle 2

HP Bundle 3:


6 Months PDF Access For All HP Exams with Updates
$300

$1200

Buy Bundle 3

HP Bundle 4:


12 Months PDF Access For All HP Exams with Updates
$400

$1600

Buy Bundle 4
Disclaimer: Fair Usage Policy - Daily 5 Downloads

Aruba Certified Switching Professional Exam Dumps


Exam Code: HPE6-A73
Exam Name: Aruba Certified Switching Professional

  • 90 Days Free Updates
  • HP Experts Verified Answers
  • Printable PDF File Format
  • HPE6-A73 Exam Passing Assurance

Get 100% Real HPE6-A73 Exam Dumps With Verified Answers As Seen in the Real Exam. Aruba Certified Switching Professional Exam Questions are Updated Frequently and Reviewed by Industry TOP Experts for Passing Aruba Certified Switching Professional (ACSP) V1 Exam Quickly and Hassle Free.

HP HPE6-A73 Dumps


Struggling with Aruba Certified Switching Professional preparation? Get the edge you need! Our carefully created HPE6-A73 dumps give you the confidence to pass the exam. We offer:

1. Up-to-date Aruba Certified Switching Professional (ACSP) V1 practice questions: Stay current with the latest exam content.
2. PDF and test engine formats: Choose the study tools that work best for you.
3. Realistic HP HPE6-A73 practice exam: Simulate the real exam experience and boost your readiness.

Pass your Aruba Certified Switching Professional (ACSP) V1 exam with ease. Try our study materials today!

Official Aruba Certified Switching Professional exam info is available on HPE website at https://certification-learning.hpe.com/tr/datacard/exam/HPE6-A73

Prepare your Aruba Certified Switching Professional (ACSP) V1 exam with confidence!

We provide top-quality HPE6-A73 exam dumps materials that are:

1. Accurate and up-to-date: Reflect the latest HP exam changes and ensure you are studying the right content.
2. Comprehensive Cover all exam topics so you do not need to rely on multiple sources.
3. Convenient formats: Choose between PDF files and online Aruba Certified Switching Professional practice test for easy studying on any device.

Do not waste time on unreliable HPE6-A73 practice test. Choose our proven Aruba Certified Switching Professional (ACSP) V1 study materials and pass with flying colors. Try Dumps4free Aruba Certified Switching Professional 2024 material today!

Aruba Certified Switching Professional (ACSP) V1 Exams
  • Assurance

    Aruba Certified Switching Professional practice exam has been updated to reflect the most recent questions from the HP HPE6-A73 Exam.

  • Demo

    Try before you buy! Get a free demo of our Aruba Certified Switching Professional (ACSP) V1 exam dumps and see the quality for yourself. Need help? Chat with our support team.

  • Validity

    Our HP HPE6-A73 PDF contains expert-verified questions and answers, ensuring you're studying the most accurate and relevant material.

  • Success

    Achieve HPE6-A73 success! Our Aruba Certified Switching Professional exam questions give you the preparation edge.

If you have any question then contact our customer support at live chat or email us at support@dumps4free.com.