Latest HPE6-A66 Exam Questions

A network architect is designing a new wired and wireless solution for for a company. The company has two
buildings on a campus, which each building has three floors. The campus core will be placed in the basement
of Building 1. Each wiring closet has eight strands of multi-mode OM3 grade fiber that connect to a wiring
closet of the first floor of the building it is contained, referred to as a main distribution frame (MDF). The
maximum distance between a floor's wiring closet and the MDF is 100 feet (30 meters). The maximum
distance between the two MDFs and the campus core is no more than 150 feet (45 meters). There are eight
strands of multi-mode OM3 grade fiber from these two MDF closets to the campus core.
Based on this information, which type of design should be used and what is the maximum speeds supported all
uplinks for the existing the multi-mode fiber?

A company has chosen an Aruba mobility controller solution for the redesign of their wireless network The
design will have two 7205 controllers in a cluster for campus employees and a single VMC-50 virtual
controller for remote access via a DMZ. A Mobility Master (MM) is used for centralized license and controller
management. All controllers will minimally run ArubaOS 8 4 or later Currently the company has 1.000
employees. There are 30 branch offices that will use RAPs to connect to the DMZ controller. A peak of 100
users concurrently using the VIA client will also connect to the DMZ controller.
How many Aruba LIC-VIA licenses does the company need to purchase for this solution?

Which IRIS option will automatically create a project with a blank preconfigured Site-1 ?

A high-end theater venue will be implementing an Aruba wireless solution using ceiling- and wall-mounted
APs. The venue wants to ensure the the APs blend into the ceiling and wall environments. What solution
should the customer use to ensure that wireless coverage is not hampered?

A customer requires a campus core virtualization solution that supports a dual control and management planes,
as well as active-active forwarding paths. Which solution would meet the customer's requirements?

Which must you perform in IRIS to assign a device to a Design Group?

A network architect is replacing an old wireless implementation based on 802.11 a with a new wireless
solution. The company has a lot of money invested in legacy wireless barcode scanners and will not be
replacing them. However, the bandwidth that the company expects each AP to have less than 700 Mbps in
bandwidth, and this is not expected to change in the future.
Which wireless solution would best meet this company's needs and be the most cost-effective?

Which feature does the Aruba AP 387 support?

A network architect is designing a wireless solution for a company that is leasing one floor in a multi-floor
building in a downtown area. The customer is concerned about ensuring complete Wi-Fi coverage and
pin-pointing RF hazards. What type of survey should the network architect perform?

Which component uniquely defines the BSSID when implementing an employee SSID?