HPE6-A66 Practice Test

A network architect is designing a new Wi-Fi solution for a small university The solution will involve two
mobility controllers that will be clustered at the campus core Because students use a lot of video in both the
dormitory rooms and in the classrooms, the solution will need to support 50Gbps via link aggregation between
the controllers and core switches.
Which solution would most cost-effectively meet this requirement for the campus core?

A.

Aruba 7220 mobility controllers and 3810M switches

B.

Aruba 7210 mobility controllers and 5406R switches

C.

Aruba 7240XM mobility controllers and 3810M switches

D.

Aruba 7280 mobility controllers and 5406R switches

A company has two buildings on a campus, where each building has three floors, which two wiring closets per
floor Assume that there will be 24 APs connected via POE+ to each wiring closet, along with 128 wired user
connections. Which backplane stacking solution will provide the necessary Ethernet port capacity for all
devices on Building 1 Floor 2 and is fully meshed?

A.

Two 381 OM 24-port POE+ switches and three 381OM 48-port switches per wiring closet

B.

Two 2930F 24-port POE+ switches and three 2930F 48-port switches per wiring closet

C.

One 2930M 24-port POE+ switch and two 2930M 48-port switches per wiring closet

D.

One 381 OM 24-port POE+ switches and two 2930M 48-port switches per wiring closet

A company needs to replace an existing legacy wireless and wired solution with one that supports features like
802 11 ax for APs and logical switching for switches. The company is located on a single floor with two
wiring closets. Assume that there will be 10 APs connected via POE+ to each wiring closet, along with 36
wired user connections All switches on a floor should be configured in a single stack. The distance between
wiring closets is 100 feet (31 meters).
Which switching solution will minimally provide 10 Gbps uplinks at the most cost-effective price, while still
meeting the company's requirements?

A.

2930M switches

B.

2930F switches

C.

5406R switches

D.

3810M switches

A network architect is redesigning a wireless network. The architect begins by analyzing the number of spatial
streams supported by APs of various vendors as well as the wireless devices currently in the network, if the
company wants to ensure that new wireless design, including user wireless devices, support Multi-User MIMO
(MU-MIMO). which standard or standards must the wireless products support?

A.

Only 802.11ax and 8011.ac

B.

Only 802.11ax

C.

Only 802.11ax,802.1lac, and 802.l1n

D.

Only 802.11ax,802.11ac, 802.11n, and 802.11a

Which two challenges do802.1ig barcode scanners present to a WLAN design? (Select two.)

A.

roaming between APs

B.

encountering RF interference by devices

C.

determining the RF channel bandwidth consumed per Barcode scanner

D.

implementing adequate security measures to ensure PCI compliance

E.

providing consistent performance on all available channels