Question # 1 An administrator is attempting to configure Storage I/O Control (SIOC) on five datastores within a vSphere environment. The administrator is being asked to determine why SIOC configuration completed successfully on only four of the datastores.
What are two possible reasons why the configuration was not successful? (Choose two.)
The datastore contains Raw Device Mappings (RDMs).
SAS disks are used for the datastore.
The datastore has multiple extents.
The datastore is using ISCSI.
The administrator is using NFS storage.
Click for Answer
The datastore contains Raw Device Mappings (RDMs).
The datastore has multiple extents.
Answer Description SIOC configuration may fail if the datastore contains RDMs or has multiple extents, as these are not supported by SIOC.
References: https://docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vsphere.storage.doc/GUID-FB3F5C5C-D3F6-4
Storage I/O Control is supported on Fibre Channel-connected, iSCSI-connected, and NFS-connected storage. Raw Device Mapping (RDM) is not supported. Storage I/O Control does not support datastores with multiple extents.
Question # 2 An administrator needs to configure a content library solution based on the following information:
•A new corporate virtual machine (VM) template is created every month to include all of the latest patches. •The new VM template should be downloaded from the primary data center site (London) to two secondary data center sites (Tokyo and New York) as soon as possible. •There is limited disk space available at one of the secondary data center sites (Tokyo) due to an ongoing data center consolidation project.
Which four steps should the administrator take to configure the content library solution before adding a VM template? (Choose four.)
Create a new published content library In each secondary site
Configure the New York subscribed content library to download content immediately.
Configure the Tokyo subscribed content library to download content immediately
Configure the Tokyo subscribed content library to download content when needed
Create a new published content library at the primary site
Click for Answer
Configure the New York subscribed content library to download content immediately.
Configure the Tokyo subscribed content library to download content when needed
Create a new published content library at the primary site
Answer Description The administrator should take these four steps to configure the content library solution before adding a VM template:
Create a new published content library at the primary site, which allows the administrator to share the VM template with other sites.
Configure the New York subscribed content library to download content immediately, which ensures that the new VM template is downloaded from the primary site as soon as possible.
Configure the Tokyo subscribed content library to download content when needed, which saves disk space at the secondary site by downloading only the metadata of the VM template until it is deployed.
Create a new subscribed content library in each secondary site, which allows the administrator to subscribe to the published content library at the primary site and synchronize the VM template.
References: https://docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vsphere.vm_admin.doc/GUID-E8E854D
Question # 3 During the staging of a patch on a vCenter Server Appliance, an error was encountered and the process stopped. An administrator resolved the root cause and is ready to continue with the staging of the patch.
From the vCenter Management Interface, which action should the administrator take to continue the process from the point at which the error occurred?
Use the Stage and Install option to resume the staging.
Use the Resume option to resume the staging.
Use the Unstage option to restart the staging.
Use the Stage Only option to restart the staging.
Click for Answer
Use the Resume option to resume the staging.
Answer Description Explanation docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vcenter.upgrade.doc/GUID-FF533442-66F0-4797-976
Question # 4 An administrator is adding a new ESXi host to an existing vSphere cluster. When selecting the cluster, the administrator Is unable to use the Cluster Quickstart workflow to add and configure the additional host. What could be the root cause of this issue?
The administrator has previously dismissed the Cluster Quickstart workflow.
The administrator must manually add the host to the cluster before using the Cluster Quickstart workflow.
The administrator has not been assigned the required permissions to use the Cluster Quickstart workflow.
The administrator must enable the Cluster Quickstart workflow option in VMware vCenter.
Click for Answer
The administrator has previously dismissed the Cluster Quickstart workflow.
Answer Description Option A is correct because it indicates that the administrator has previously dismissed the Cluster Quickstart workflow, which will prevent them from using it to add and configure an additional host. To use the Cluster Quickstart workflow again, the administrator must enable it in the cluster settings. Option B is incorrect because the administrator does not need to manually add the host to the cluster before using the Cluster Quickstart workflow, as this is one of the steps in the workflow. Option C is incorrect because the administrator does not need any special permissions to use the Cluster Quickstart workflow, as long as they have permissions to perform cluster operations. Option D is incorrect because there is no option to enable the Cluster Quickstart workflow in VMware vCenter, as this is a feature of vSphere clusters.
References: https://docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vsphere.vcenterhost.doc/GUID-9F9E3F8C-0E2
Question # 5 An administrator is asked to configure a security policy at the port group level of a standard switch. The following requirements must be met: • The security policy must apply to all virtual machines on portgroup-1. • All traffic must be forwarded, regardless of the destination.
Forged transmits set to reject
MAC address changes set to accept
Promiscuous mode set to reject
Promiscuous mode set to accept
Click for Answer
Promiscuous mode set to accept
Answer Description The security policy that must be configured at the port group level to allow all traffic to be forwarded regardless of the destination is promiscuous mode set to accept, which allows receiving all traffic on a virtual switch port.References: https://docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vsphere.networking.doc/GUID-D5960C77-0D1
How to Pass VMware 2V0-21.23 Exam?
1
Buy Dumps
Get the most accurate VMware prep with our exam-focused 2V0-21.23 dumps. Real questions and verified answers – the ultimate tool for passing on your first try.
2
Preparation
Prep for the VCP-DCV exam from the comfort of your home. Download our 2V0-21.23 practice questions and start studying today!
3
Success
Don't be surprised on exam day! Our accurate VMware vSphere 8.x Professional practice questions match the real exam format. Prepare at home and walk into your exam with ease.
Questions People Ask About 2V0-21.23 Exam
VCP-DCV (VMware Certified Professional - Data Center Virtualization) certification validates your skills in installing, configuring, and managing VMware vSphere environments. It proves you understand vSphere's components, troubleshooting techniques, and how to optimize a virtualized data center.
VMware Certified Professional - Data Center Virtualization VCP-DCV certification equips you for key roles in IT infrastructure and virtualization. It prepares you for positions like Systems Administrator, Network Engineer, and Data Center Engineer. These roles involve managing and optimizing VMware vSphere environments, crucial for modern data centers.
Here's a mix of resources for your 2V0-21.23 prep journey:
VMware Documentation : The technical source, but can be dense for beginners.
VMware Official Courses: In-depth but can be pricey.
Udemy, Pluralsight, etc.: Structured learning paths and video courses.
VMware Hands-on Labs: Practice is vital!
Dumps4free: 2V0-21.23 Practice exam
Community Forums: Ask questions and learn from others' experiences.
VCP-DCV 2023 (VMware Certified Professional - Data Center Virtualization) certification is an excellent starting point for a career in VMware technologies. It provides a solid foundation in data center virtualization, a key area in today's IT landscape.
Yes! Based on feedback from test-takers, be extra prepared for these 2V0-21.23 sections:
Storage & Networking: In-depth understanding of vSAN, NSX concepts.
Troubleshooting: Scenarios testing your problem-solving, not just memorization.
New vSphere Features: Make sure your study materials are updated for the latest version.
2V0-21.23 exam, part of the VMware Certified Professional - Data Center Virtualization (VCP-DCV) 2023 certification, primarily consists of multiple-choice questions. While it doesn't typically include hands-on simulations, the exam thoroughly tests your understanding and knowledge of vSphere 7.x environments through scenario-based questions.
VCP-DCV 2023 opens doors to several advanced VMware paths! Consider:
Network Virtualization (VCAP-NV ): Focus on NSX design and deployment.
Cloud Management & Automation (VCAP-CMA): vRealize automation skills.
Advanced Design tracks (VCIX): The highest-level certification, proving design mastery.
To take the vSphere 8.x Professional exam, candidates must first complete one of VMware's official training courses for vSphere 8.x. This requirement ensures that examinees have the foundational knowledge and hands-on experience necessary for the exam. Additionally, while not mandatory, having prior experience with VMware vSphere technologies is highly recommended.
VMware vSphere 8.x Professional exams focus heavily on the latest vSphere features and advancements. Expect more emphasis on topics like Kubernetes integration, vSphere with Tanzu, cloud-native concepts, and modern security practices within a virtualized environment. Make sure your study materials are specifically updated for vSphere 8.x!