HPE6-A71 Practice Test

An administrator wants to implement bandwidth limits to restrict employee access to highrisk
web sites. On the Mobility Master (MM), where would the administrator define these
limits?

A.

802.1X policy

B.

User role

C.

Firewall policy

D.

AAA policy

Refer to the exhibit.

An administrator supports a RAP at a branch office shown in the exhibit. The company has
one Mobility Controller (MC) at the Primary DMZ site and one at the Secondary DMZ site.
The RAP is configured to connect to only the MC at the Primary DMZ site. A network
outage with the ISP at the Primary DMZ site causes the RAP to reboot. Upon reboot, the
RAP cannot build a tunnel to the Secondary DMZ site MC because the administrator forgot
to add the Second LMS IP address to the AP Group configuration. Once the RAP can
successfully connect, the administrator can add the Secondary DMZ MC as a backup LMS
to fix the AP Group.
What should the administrator implement to allow the RAP to connect to the MC at the
Secondary DMZ site while the outage at the primary site persists?

A.

Dynamic discovery through DHCP Option 43

B.

Static configuration from apboot mode

C.

Dynamic discovery through DHCP Option 60

D.

Dynamic discovery through multicast ADP

An administrator implements the Aruba AitGroup feature to accommodate the Apple
Bonjour service. In this implementation, which protocol advertises devices such as printers,
computers, and their services?

A.

LLDP

B.

Multicast DHCP

C.

Multicast DNS

D.

Broadcast DNS

In a VPN that uses certificate-based authentication, which component must be configured
on the Mobility Master (MM) to allow a RAP to successfully connect to a Mobility Controller
(MC)?

A.

RAP VPN username and password

B.

WLAN and new RAP group

C.

RAP IPSec pre-shared key

D.

RAP whitelist

An administrator wants to implement 802.1X authentication on Ethernet ports on branch
office controllers. What must the administrator do to implement this policy?

A.

Define the port an untrusted, and assign an AAA policy to the port.

B.

Define the port as trusted, and assign an AAA policy to the port.

C.

Define the port as untrusted, and assign an AAA policy to the VLAN.

D.

Define the port as trusted, and assign an AAA policy to the VLAN.