E20-375 Practice Test

The VSI RecoverPoint Management plug-in can protect datastores accessed by the ESXi
host using which protocols?

A.

Fibre Channel, FCoE, and iSCSI

B.

Fibre Channel, FCoE, and NFS

C.

FCoE, iSCSI, and CIFS

D.

FCoE, iSCSI, and NFS

Which authentication method is available for use between the vRPA and the VNX when
configuring RecoverPoint/SE with Deployment Manager?

A.

CHAP

B.

iSNS

C.

LDAP

D.

RSA

An existing RecoverPoint/CL environment consists of one cluster at the main office and two
off-site DR clusters. You have been asked to expand the environment to the maximum
number of DR sites using RecoverPoint.
How many additional clusters could be added to this RecoverPoint Environment?

A.

2

B.

4

C.

5

D.

8

Refer to the exhibit.


  
 A RecoverPoint cluster with two RPAs and VPLEX splitter has been deployed. When you
run the rp validate-configuration VPLEX CLI command, the error shown in the exhibit is
displayed.
What is the most likely cause of this error?

A.

Only two initiators per RPA have been used.

B.

The RPAs are not zoned to the VPLEX BE ports.

C.

One of the two RPAs is missing.

D.

The RPAs are not zoned to the VPLEX FE ports.  

You are responsible for installing a four-node RPA cluster. All RPAs are powered on. Both
the FC and IP networks are connected, zoned, and routed properly. The RPAs are loaded
with the latest image and IP addresses are set. However, Deployment Manager cannot
discover RPAs.
What is a possible cause? 

A.

Port 22 not open between host running Deployment Manager and RPAs

B.

Deployment Manager host and RPAs on different subnets

C.

DHCP not used to set IP addresses for RPAs

D.

RPAs not installed separately using Deployment Manager