Refer to the exhibit.
A network administrator deploys the DHCP profiler service in two ISE servers: 10.3.10.101
and 10.3.10.102. All BYOD devices connecting to WLAN on VLAN63 have been incorrectly
profiled and are assigned as unknown profiled endpoints. Which action efficiently rectifies
the issue according to Cisco recommendations?
A.
Nothing needed to be added on the Cisco WLC or VLAN interface. The ISE
configuration must be fixed.
B.
Disable DHCP proxy on the Cisco WLC.
C.
Disable DHCP proxy on the Cisco WLC and run the ip helper-address command under
the VLAN interface to point to DHCP and the two ISE servers.
D.
Keep DHCP proxy enabled on the Cisco WLC and define helper-address under the
VLAN interface to point to the two ISE servers.
Disable DHCP proxy on the Cisco WLC and run the ip helper-address command under
the VLAN interface to point to DHCP and the two ISE servers.
Explanation: https://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wirelesslan-
controllers/110865-dhcp-wlc.html
When implementing self-registration for guest/BYOD devices, what happens when an
employee tries to connect four devices to the network at the same time?
A.
The last device is removed and the newly added device is updated as active device.
B.
The registration is allowed, but only one device is connected at any given time.
C.
All devices are allowed on the network simultaneously.
D.
Purge time dictates how long a device is registered to the portal
The registration is allowed, but only one device is connected at any given time.
Explanation:
https://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Borderless_Networks/Unified_A
ccess/BYOD_Design_Guide/BYOD_Enhanced_Use_Case.html
Which devices can be tracked with the Cisco Context Aware Services?
A.
wired and wireless devices
B.
wireless devices
C.
wired devices
D.
Cisco certified wireless devices
wired and wireless devices
What is the default NMSP echo interval between Cisco MSE and a Wireless LAN
Controller?
A.
10 seconds
B.
15 seconds
C.
30 seconds
D.
60 seconds
15 seconds
Where is a Cisco OEAP enabled on a Cisco Catalyst 9800 Series Wireless Controller?
A.
RF Profile
B.
Flex Profile
C.
Policy Profile
D.
AP Join Profile
Flex Profile
Page 4 out of 16 Pages |
Previous |