- Email support@dumps4free.com
What is an advantage of using auto mode versus static mode of power allocation when an access point is connected to a PoE switch port?
A.
It detects the device is a powered device
B.
All four pairs of the cable are used
C.
Power policing is enabled at the same time
D.
The default level is used for the access point
The default level is used for the access point
https://www.cisco.com/en/US/docs/switches/lan/catalyst3850/software/release/3.2_0_se/multibook/configuration_guide/b_consolidated_config_guide_3850_chapter_011010.html
Drag and drop the devices from the left into order on the right to upgrade the software from version 19 to version 20.
Refer to the exhibit.
A.
Option A
B.
Option B
C.
Option C
D.
Option D
Option B
https://sdwandocs.cisco.com/Product_Documentation/Software_Features/SDWAN_Release_16.3/02System_and_Interfaces/07Network_Interface_Configuration_Examples
What is the main purpose of using TLOC extensions in WAN Edge router configuration?
A.
creates hardware-level transport redundancy at the local site
B.
creates an IPsec tunnel from WAN Edge to vBond Orchestrator
C.
transports control traffic to a redundant vSmart Controller
D.
transports control traffic w remote-site WAN Edge routers
transports control traffic w remote-site WAN Edge routers
An engineer is troubleshooting a certificate issue on vEdge. Which command is used to verify the validity of the certificates?
A.
show control local-properties
B.
show control summary
C.
show certificate installed
D.
show certificate status
show control local-properties
https://www.cisco.com/c/en/us/td/docs/routers/sdwan/command/sdwan-crbook/operational-cmd.html#wp2835720000
| Page 1 out of 72 Pages |