- Email support@dumps4free.com
Topic 2, Exam Pool B
An engineer configured policy-based routing for a destination IP address that does not exist in the routing table. How is the packet treated through the policy for configuring the set ip default next-hop command?
A.
Packets are not forwarded to the specific next hop
B.
Packets are forwarded based on the routing table
C.
Packets are forwarded based on a static route
D.
Packets are forwarded to the specific next hop
Packets are forwarded to the specific next hop
Refer to the exhibits.
A user on the 192.168.1.0/24 network can successfully ping 192.168.3.1, but the administrator cannot ping 192.168.3.1 from the LA router. Which set of configurations fixes the issue?
A.
Option A
B.
Option B
C.
Option C
D.
Option D
Option B
Refer to Exhibit:
AS 111 wanted to use AS 200 as the preferred path for 172.20.5.0/24 and AS 100 as the backup. After the configuration, AS 100 is not used for any other routes. Which configuration resolves the issue?
A.
route-mmap SETLP permit 10
match ip address prefix-list PLIST1
set local-preference 99
route-map SETLP permit 20
B.
route-map SETLP permit 10
match ip address prefix-list PLIST1
set local-preference 110
route-map SETLP permit 20
C.
router bgp 111
no neighbor 192.168.10.1 route-map SETLP in
neighbor 192.168.10.1 route-map SETLP out
D.
router bap 111
no neighbor 192.168.10.1 route-map SETLP in
neighbor 192.168.20.2 route-map SE TLP in
route-mmap SETLP permit 10
match ip address prefix-list PLIST1
set local-preference 99
route-map SETLP permit 20
Explanation:
There is an implicit deny all at the end of any route-map so all other traffic that does not match 172.20.5.0/24 would be dropped. Therefore we have to add a permitsequence at the end of the route-map to allow other traffic. The default value of Local Preference is 100 and higher value is preferred so we have to set the local preference of AS100 lower than that of AS200.
Refer to the exhibit. The OSPF neighbor relationship is not coming up What must be configured to restore OSPF neighbor adjacency?
A.
OSPF on the remote router
B.
matching hello timers
C.
use router ID
D.
matching MTU values
matching MTU values
Refer to the exhibit.
A user has set up an IP SLA probe to test if a non-SLA host web server on IP address 10.1.1.1 accepts HTTP sessions prior to deployment. The probe is failing. Which action should the network administrator recommend for the probe to succeed?
A.
Re-issue the ip sla schedule command.
B.
Add icmp-echo command for the host.
C.
Add the control disable option to the tcp connect.
D.
Modify the ip sla schedule frequency to forever.
Add the control disable option to the tcp connect.
| Page 25 out of 113 Pages |
| Previous |