200-301 Practice Test

What is a characteristic of cloud-based network topology?

A.

wireless connections provide the sole access method to services

B.

onsite network services are provided with physical Layer 2 and Layer 3 components

C.

services are provided by a public, private, or hybrid deployment

D.

physical workstations are configured to share resources

Which device controls the forwarding of authentication requests for users when connecting to the network using a lightweight access point?

A.

TACACS server

B.

wireless access point

C.

RADIUS server

D.

wireless LAN controller

Refer to the exhibit.

An administrator must turn off the Cisco Discovery Protocol on the port configured with
address last usable address in the 10.0.0.0/30 subnet. Which command set meets the
requirement?

A.

interface gi0/1
no cdp enable

B.

interface gi0/1
clear cdp table

C.

interface gi0/0
no cdp advertise-v2

D.

interface gi0/0
no cdp run

Several new coverage cells are required to improve the Wi-Fi network of an organization.
Which two standard designs are recommended? (choose two.)

A.

5GHz provides increased network capacity with up to 23 nonoveriapping channels.

B.

For maximum throughput, the WLC is configured to dynamically set adjacent access points to the same channel.

C.

5GHz channel selection requires an autonomous access point.

D.

Adjacent cells with overlapping channels use a repeater access point.

E.

Cells that overlap one another are configured to use nonoveriapping channels.

What is a difference between local AP mode and FiexConnet AP mode?

A.

Local AP mode creates two CAPWAP tunnels per AP to the WLC

B.

FiexConnect AP mode fails to function if the AP loses connectivity with the WLC

C.

FlexConnect AP mode bridges the traffic from the AP to the WLC when local switching is configured

D.

Local AP mode causes the AP to behave as if it were an autonomous AP